Transtar Max Clear Coat Gallon and hardener

Transtar’s MAX Clearcoat is a super fast drying clearcoat that provides the additional features of low overspray and super high gloss. This unique product improves production by maximizing vehicle throughput. The fast flash feature provides the benefit of less dust and dirt getting trapped in the finish, which means less labor expanded to buff or polish.

Fastest out of dust times versus any other clearcoat

Low overspray

Optimizes productivity

Reduced bake times (10 minutes at 140°F)

Super high gloss and durability

Outstanding cure rates

Air dries in less than two hours

Reduces energy requirements/costs

Does not require a flex additive

Easy to buff

Activator	Flash Time	Dust Free	Sand	Delivery
6854 Lightning	2 min	10 min	1 hr	2-3 hrs
6874 Spot/Panel	3-5 min	10-15 min	2 hrs	2-3 hrs
6894 Overall	5-10 min	10-15 min	2 hr	2-3 hrs
6894HT Overall Hi-Temp	10-15 min	15-25 min	2 hrs	2-3 hrs

INSTRUCTIONS - MIX RATIO:
4 parts Transtar MAX Clearcoat with 1 part activator (6800 Series Activators) by volume.

APPLICATION:
Stir product before use. Apply 2 - 3 medium wet flowing coats using the gun settings listed in the table below. Allow 5 - 15 minutes flash time between coats (depending upon activator used). For optimum appearance, activate clear immediately before applying. Tarnstar MAX Clearcoat should not be applied over acrylic lacquers.



CT residents only will be charged tax