Poly-Flex Flexible Polyester Glazing Putty

Poly-Flex is a flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.

Poly-Flex performs just like EVERCOAT's Metal Glaze #416. It cures to a sandable state in approximately 20 minutes without clogging the sandpaper.

Adhesion is outstanding on most plastics. Poly-Flex provides an ultra fine featheredge that resists swelling when top coated. Poly-Flex is also recommended for use on rigid plastics, fiberglass, SMC and metal surfaces. Plus, it contains ZNX-7* for adhesion to bare steel, galvanized steel and aluminum.

NOTE: When repairing thermo plastics such as; TPO (TEO) and PP, it is best to retain as much of the OEM finish as possible. Thermo plastic surfaces need to be oxidized by a flame treatment process prior to the application of Poly-Flex.

Typical Properties	Performance
Appearance	Light gray flowable liquid
Gel Time	5-6 minutes
Sand Time	15-20 minutes
Flexibility	Excellent up to a 77 degree bend
Mixing Ratio	2% by weight blue cream hardener (a ribbon of hardener from edge to edge across the center of a 4" diameter puddle of putty).
Application Thickness:	Maximum 1/8" thick after sanding