Home > Truck Lite > Rubbolite > ECE-Approved LED Model 45 Multi-Volt

ECE-Approved LED Model 45 Multi-Volt

Material:
Polycarbonate lens & housing
Black PVC grommet
16 gauge hardwires
Light Source:
Light Emitting Diodes (LEDs)
10-30v lamp designed at 13.5v & 28.0v
Stop/position designed at .16amp
Direction indicator designed at .34 amp
Rear fog designed at .25 amp

Features
OmniVolt universal lighting products address increasing vehicle power demands by operating equally in electrical systems that range from 10 to 30 volts
Lamps are hardwired with standard .180 molded bullet connectors
Module receptacle wires with ring terminals available for retrofitting LED lamps to existing modules
Direct pin-to-circuit board solders assure vibration resistant contacts
Electronics completely sealed in epoxy to resist corrosion & moisture
Low current draw, leaving more power for other vehicle requirements
Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions: OmniVolt universal lighting products address increasing vehicle power demands by operating equally in electrical systems that range from 10 to 30 volts
Lamps are hardwired with standard .180 molded bullet connectors
Module receptacle wires with ring terminals available for retrofitting LED lamps to existing modules
Direct pin-to-circuit board solders assure vibration resistant contacts
Electronics completely sealed in epoxy to resist corrosion & moisture
Low current draw, leaving more power for other vehicle requirements
Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Lamps are hardwired with standard .180 molded bullet connectors
Module receptacle wires with ring terminals available for retrofitting LED lamps to existing modules
Direct pin-to-circuit board solders assure vibration resistant contacts
Electronics completely sealed in epoxy to resist corrosion & moisture
Low current draw, leaving more power for other vehicle requirements
Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Module receptacle wires with ring terminals available for retrofitting LED lamps to existing modules
Direct pin-to-circuit board solders assure vibration resistant contacts
Electronics completely sealed in epoxy to resist corrosion & moisture
Low current draw, leaving more power for other vehicle requirements
Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Direct pin-to-circuit board solders assure vibration resistant contacts
Electronics completely sealed in epoxy to resist corrosion & moisture
Low current draw, leaving more power for other vehicle requirements
Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Electronics completely sealed in epoxy to resist corrosion & moisture
Low current draw, leaving more power for other vehicle requirements
Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Low current draw, leaving more power for other vehicle requirements
Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Sonically sealed lens & housing
LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; LEDs are less susceptible to shock & vibration
Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Available in three versions - high intensity fog (red), turn indicator (yellow) & stop position (red)
Approved to comply with ECE regulations for stop position, turn & rear fog functions; Approved to comply with ECE regulations for stop position, turn & rear fog functions

CT Residents only will be charged tax

Rubbolite 45041R Red, 10-30v Rear Fog kit Regular price: $168.48 Levine Price: $79.99 45041R	Rubbolite 45042R Red, 10-30v Rear Position/Stop Kit Regular price: $163.05 Levine Price: $77.99 45042R
Rubbolite 45044Y Yellow, 10-30v Direction Indicator Kit Regular price: $159.05 Levine Price: $75.99 45044Y	Rubbolite 45931R Red, 10-30v Rear Fog Lamp Only Regular price: $156.85 Levine Price: $74.99 45931R
Rubbolite 45932R Red, 10-30v Rear Position/Stop Lamp Only Regular price: $162.91 Levine Price: $76.99 45932R	Rubbolite 45934Y Yellow, 10-30v Direction Indicator Lamp Only Regular price: $147.43 Levine Price: $69.99 45934Y

*Free Ground Shipping on all domestic orders over $200
$9.95 Flat Rate ground shipping on all domestic orders under $200

We Are A Top Rated Store

Phone 800-394-9012 Monday - Friday 8AM EDT - 5PM EDT

ECE-Approved LED Model 45 Multi-Volt

yahoo store design