SEM Sante Fe Plastic and Vinyl Color Coat

SEM Vinyl And Plastic COLOR COAT is an elastomeric coating formulated to match, restore or change color on most vinyl surfaces, flexible and rigid plastics, carpet and velour. SEM vinyl and plastic COLOR COAT is a fade-resistant, flexible and permanent coating. SEM COLOR COAT is not a dye.

Application:

Clean surface thoroughly with soap and rinse with water. Allow to dry and clean with appropriate cleaner: SEM Vinyl Prep or SEM Plastic Prep.

To promote adhesion on plastics, first use SEM Sand Free

Mask off adjacent areas to protect them from overspray.

Apply paint using light "mist" coats, allowing 5 - 10 minutes dry time between coats.

For added protection or change of sheen apply SEM Color Coat clear.

See the full SEM Vinyl and Plastic Coat color chart